© Copyright 2004-2008 Apple Computer, Inc., Mozilla Foundation, and Opera Software ASA.
You are granted a license to use, reproduce and create derivative works of this document.
canvas
elementwidth
height
interface HTMLCanvasElement # type.name type.exists type.delete type.prototype type.replace type.extend : HTMLElement { attribute unsigned long width; # size.attributes size.attributes.type.get size.attributes.type.set attribute unsigned long height; # size.attributes size.attributes.type.get size.attributes.type.set DOMString toDataURL(); DOMString toDataURL(in DOMString type); DOMObject getContext(in DOMString contextId); };
The canvas
element represents a
resolution-dependent bitmap canvas, which can be used for rendering
graphs, game graphics, or other visual images on the fly.
Authors should not use the canvas
element in a document when a more suitable element is available. For
example, it is inappropriate to use a canvas
element to render a page heading: if the
desired presentation of the heading is graphically intense, it should be
marked up using appropriate elements (typically h1
) and then styled using CSS and supporting
technologies such as XBL.
When authors use the canvas
element,
they should also provide content that, when presented to the user, conveys
essentially the same function or purpose as the bitmap canvas. This
content may be placed as content of the canvas
element. The contents of the canvas
element, if any, are the element's fallback content # fallback.basic fallback.multiple fallback.nested .
In interactive visual media, if the canvas
element is with
script, the canvas
element
represents an embedded element with a dynamically created image.
In non-interactive, static, visual media, if the canvas
element has been previously painted on
(e.g. if the page was viewed in an interactive visual medium and is now
being printed, or if some script that ran during the page layout process
painted on the element), then the canvas
element represents embedded content with the current image and size.
Otherwise, the element represents its fallback
content instead.
In non-visual media, and in visual media if the canvas
element is without
script, the canvas
element
represents its fallback content instead.
The canvas
element has two attributes
to control the size of the coordinate space: width
and height
. These attributes, when
specified, must have values that are valid non-negative integers. The rules for parsing non-negative integers must be used to
obtain their numeric values # size.attributes.parse.whitespace size.attributes.parse.nonnumber size.attributes.parse.zero size.attributes.parse.negative size.attributes.parse.zerosuffix size.attributes.parse.floatsuffix size.attributes.parse.badsuffix size.attributes.parse.percentsuffix size.attributes.setAttribute.whitespace size.attributes.setAttribute.nonnumber size.attributes.setAttribute.zero size.attributes.setAttribute.negative size.attributes.setAttribute.zerosuffix size.attributes.setAttribute.floatsuffix size.attributes.setAttribute.badsuffix size.attributes.setAttribute.percentsuffix . If an attribute is missing # size.attributes.default size.attributes.removed , or if parsing its
value returns an error # size.attributes.parse.nonnumber size.attributes.parse.negative size.attributes.setAttribute.nonnumber size.attributes.setAttribute.negative , then the default value must be used instead. The
width
attribute
defaults to 300, and the height
attribute defaults to 150 # size.attributes.default .
The intrinsic dimensions of the canvas
element equal the size of the coordinate
space, with the numbers interpreted in CSS pixels. However, the element
can be sized arbitrarily by a style sheet. During rendering, the image is
scaled to fit this layout size # size.attributes.style .
The size of the coordinate space does not necessarily represent the size of the actual bitmap that the user agent will use internally or during rendering. On high-definition displays, for instance, the user agent may internally use a bitmap with two device pixels per unit in the coordinate space, so that the rendering remains at high quality throughout.
Whenever the width
and height
attributes are set (whether to a new
value or to the previous value), the bitmap and any associated contexts
must be cleared back to their initial state and reinitialized with the
newly specified coordinate space dimensions # initial.reset.different initial.reset.same initial.reset.path initial.reset.clip initial.reset.transform security.reset initial.reset.2dstate .
The width
and
height
DOM
attributes must reflect the content attributes of
the same name # size.attributes.reflect.1 size.attributes.reflect.2 .
Only one square appears to be drawn in the following example:
// canvas is a reference to a <canvas> element var context = canvas.getContext('2d'); context.fillRect(0,0,50,50); canvas.setAttribute('width', '300'); // clears the canvas context.fillRect(0,100,50,50); canvas.width = canvas.width; // clears the canvas context.fillRect(100,0,50,50); // only this square remains
When the canvas is initialized it must be set to fully transparent black # initial.colour .
To draw on the canvas, authors must first obtain a reference to a context using the getContext(contextId)
method of the canvas
element.
This specification only defines one context, with the name "2d
". If getContext()
is called with that exact string for its contextId
argument, then the UA must return a reference to an object implementing
CanvasRenderingContext2D
# 2d.getcontext.exists .
Other specifications may define their own contexts, which would return
different objects.
Vendors may also define experimental contexts using the syntax
vendorname-context
,
for example, moz-3d
.
When the UA is passed an empty string # context.emptystring or a string specifying a context that it does not support # context.unrecognised.badname context.unrecognised.badsuffix context.unrecognised.nullsuffix context.unrecognised.unicode , then it must return null. String comparisons must be literal and case-sensitive # context.casesensitive .
Arguments other than the contextId must be ignored, and must not cause the user agent to raise an exception (as would normally occur if a method was called with the wrong number of arguments) # context.arguments.extra .
A future version of this specification will probably define a
3d
context (probably based on the OpenGL ES API).
The toDataURL()
method must,
when called with no arguments, return a data:
URI
containing a representation of the image as a PNG file # toDataURL.default toDataURL.nocontext toDataURL.primarycolours toDataURL.complexcolours . [PNG].
If the canvas has no pixels (i.e. either its horizontal dimension or its
vertical dimension is zero) then the method must return the string "data:,
" # toDataURL.zerosize . (This is the shortest data:
URI; it represents the empty string in a text/plain
resource.)
The toDataURL(type)
method (when called with one or
more arguments) must return a data:
URI
containing a representation of the image in the format given by type. The possible values are MIME types with no
parameters, for example image/png
, image/jpeg
,
or even maybe image/svg+xml
if the implementation actually
keeps enough information to reliably render an SVG image from the canvas.
Only support for image/png
is required # toDataURL.png . User agents may
support other types. If the user agent does not support the requested
type, it must return the image using the PNG format # toDataURL.unrecognised .
User agents must convert the provided type to lower case before
establishing if they support that type and before creating the data:
URI # toDataURL.lowercase .
When trying to use types other than image/png
,
authors can check if the image was really returned in the requested format
by checking to see if the returned string starts with one the exact
strings "data:image/png,
" or "data:image/png;
". If it does, the image is PNG, and thus
the requested type was not supported. (The one exception to this is if the
canvas has either no height or no width, in which case the result might
simply be "data:,
".)
If the method is invoked with the first argument giving a type corresponding to one of the types given in the first column of the following table, and the user agent supports that type, then the subsequent arguments, if any, must be treated as described in the second cell of that row.
Type | Other arguments |
---|---|
image/jpeg | The second argument, if it is a number between 0.0 and 1.0, must be treated as the desired quality level. |
Other arguments must be ignored and must not cause the user agent to
raise an exception (as would normally occur if a method was called with
the wrong number of arguments) # toDataURL.arguments.1 toDataURL.arguments.2 toDataURL.arguments.3 . A future version of this specification
will probably allow extra parameters to be passed to toDataURL()
to
allow authors to more carefully control compression settings, image
metadata, etc.
When the getContext()
method of a canvas
element is invoked with 2d
as the argument, a CanvasRenderingContext2D
object is returned.
There is only one CanvasRenderingContext2D
object per canvas, so calling the getContext()
method with the 2d
argument a second time
must return the same object # 2d.getcontext.unique 2d.getcontext.shared .
The 2D context represents a flat Cartesian surface whose origin (0,0) is at the top left corner, with the coordinate space having x values increasing when going right, and y values increasing when going down # 2d.coordinatespace .
interface CanvasRenderingContext2D # 2d.type.exists 2d.type.delete 2d.type.prototype 2d.type.replace 2d.type.extend { // back-reference to the canvas readonly # 2d.canvas.readonly attribute HTMLCanvasElement canvas; // state void save(); // push state on state stack void restore(); // pop state stack and restore state // transformations (default transform is the identity matrix) void scale(in float x, in float y); void rotate(in float angle); void translate(in float x, in float y); void transform(in float m11, in float m12, in float m21, in float m22, in float dx, in float dy); void setTransform(in float m11, in float m12, in float m21, in float m22, in float dx, in float dy); // compositing attribute float globalAlpha; // (default 1.0) attribute DOMString globalCompositeOperation; // (default source-over) // colors and styles attribute DOMObject strokeStyle; // (default black) attribute DOMObject fillStyle; // (default black) CanvasGradient createLinearGradient(in float x0, in float y0, in float x1, in float y1); CanvasGradient createRadialGradient(in float x0, in float y0, in float r0, in float x1, in float y1, in float r1); CanvasPattern createPattern(in HTMLImageElement image, in DOMString repetition); CanvasPattern createPattern(in HTMLCanvasElement image, in DOMString repetition); // line caps/joins attribute float lineWidth; // (default 1) attribute DOMString lineCap; // "butt", "round", "square" (default "butt") attribute DOMString lineJoin; // "round", "bevel", "miter" (default "miter") attribute float miterLimit; // (default 10) // shadows attribute float shadowOffsetX; // (default 0) attribute float shadowOffsetY; // (default 0) attribute float shadowBlur; // (default 0) attribute DOMString shadowColor; // (default transparent black) // rects void clearRect(in float x, in float y, in float w, in float h); void fillRect(in float x, in float y, in float w, in float h); void strokeRect(in float x, in float y, in float w, in float h); // path API void beginPath(); void closePath(); void moveTo(in float x, in float y); void lineTo(in float x, in float y); void quadraticCurveTo(in float cpx, in float cpy, in float x, in float y); void bezierCurveTo(in float cp1x, in float cp1y, in float cp2x, in float cp2y, in float x, in float y); void arcTo(in float x1, in float y1, in float x2, in float y2, in float radius); void rect(in float x, in float y, in float w, in float h); void arc(in float x, in float y, in float radius, in float startAngle, in float endAngle, in boolean anticlockwise); void fill(); void stroke(); void clip(); boolean isPointInPath(in float x, in float y); // text attribute DOMString font; // (default 10px sans-serif) attribute DOMString textAlign; // "start", "end", "left", "right", "center" (default: "start") attribute DOMString textBaseline; // "top", "hanging", "middle", "alphabetic", "ideographic", "bottom" (default: "alphabetic") void fillText(in DOMString text, in float x, in float y); void fillText(in DOMString text, in float x, in float y, in float maxWidth); void strokeText(in DOMString text, in float x, in float y); void strokeText(in DOMString text, in float x, in float y, in float maxWidth); TextMetrics measureText(in DOMString text); // drawing images void drawImage(in HTMLImageElement image, in float dx, in float dy); void drawImage(in HTMLImageElement image, in float dx, in float dy, in float dw, in float dh); void drawImage(in HTMLImageElement image, in float sx, in float sy, in float sw, in float sh, in float dx, in float dy, in float dw, in float dh); void drawImage(in HTMLCanvasElement image, in float dx, in float dy); void drawImage(in HTMLCanvasElement image, in float dx, in float dy, in float dw, in float dh); void drawImage(in HTMLCanvasElement image, in float sx, in float sy, in float sw, in float sh, in float dx, in float dy, in float dw, in float dh); // pixel manipulation ImageData createImageData(in float sw, in float sh); ImageData getImageData(in float sx, in float sy, in float sw, in float sh); void putImageData(in ImageData imagedata, in float dx, in float dy); void putImageData(in ImageData imagedata, in float dx, in float dy, in float dirtyX, in float dirtyY, in float dirtyWidth, in float dirtyHeight); }; interface CanvasGradient { // opaque object void addColorStop(in float offset, in DOMString color); }; interface CanvasPattern { // opaque object }; interface TextMetrics { readonly attribute float width; }; interface ImageData # 2d.imageData.object.properties 2d.imageData.object.readonly 2d.imageData.object.ctor { readonly attribute long int width; readonly attribute long int height; readonly attribute CanvasPixelArray data; }; interface CanvasPixelArray { readonly attribute unsigned long length; [IndexGetter] float XXX5(in unsigned long index); [IndexSetter] void XXX6(in unsigned long index, in float value); };
The canvas
attribute must
return the canvas
element that the
context paints on # 2d.canvas.reference .
Unless otherwise stated, for the 2D context interface, any method call with a numeric argument whose value is infinite or a NaN value must be ignored # 2d.transformation.scale.nonfinite 2d.transformation.rotate.nonfinite 2d.transformation.translate.nonfinite 2d.transformation.transform.nonfinite 2d.transformation.setTransform.nonfinite 2d.clearRect.nonfinite 2d.fillRect.nonfinite 2d.strokeRect.nonfinite 2d.path.moveTo.nonfinite 2d.path.lineTo.nonfinite 2d.path.quadraticCurveTo.nonfinite 2d.path.bezierCurveTo.nonfinite 2d.path.arcTo.nonfinite 2d.path.arc.nonfinite 2d.path.rect.nonfinite 2d.drawImage.nonfinite .
Whenever the CSS value currentColor
is used as a
color in this API, the "computed value of the 'color' property" for the
purposes of determining the computed value of the currentColor
keyword is the computed value of the 'color'
property on the element in question at the time that the color is
specified # 2d.fillStyle.parse.current.basic 2d.fillStyle.parse.current.changed (e.g. when the appropriate attribute is set, or when the method
is called; not when the color is rendered or otherwise used). If the
computed value of the 'color' property is undefined for a particular case
(e.g. because the element is not in a document), then the "computed value
of the 'color' property" for the purposes of determining the computed
value of the currentColor
keyword is fully opaque
black # 2d.fillStyle.parse.current.removed . [CSS3COLOR]
Each context maintains a stack of drawing states. Drawing states consist of:
strokeStyle
# 2d.state.saverestore.strokeStyle , fillStyle
# 2d.state.saverestore.fillStyle ,
globalAlpha
# 2d.state.saverestore.globalAlpha , lineWidth
# 2d.state.saverestore.lineWidth ,
lineCap
# 2d.state.saverestore.lineCap ,
lineJoin
# 2d.state.saverestore.lineJoin , miterLimit
# 2d.state.saverestore.miterLimit , shadowOffsetX
# 2d.state.saverestore.shadowOffsetX , shadowOffsetY
# 2d.state.saverestore.shadowOffsetY , shadowBlur
# 2d.state.saverestore.shadowBlur , shadowColor
# 2d.state.saverestore.shadowColor , globalCompositeOperation
# 2d.state.saverestore.globalCompositeOperation ,
font
, textAlign
,
textBaseline
.
The current path # 2d.state.saverestore.path and the current bitmap # 2d.state.saverestore.bitmap are not part of the
drawing state. The current path is persistent, and can only be reset using
the beginPath()
method. The current bitmap is
a property of the
canvas, not the context.
The save()
method must push a copy of the current drawing state onto the drawing
state stack # 2d.state.saverestore.stack 2d.state.saverestore.stackdepth .
The restore()
method must pop
the top entry in the drawing state stack, and reset the drawing state it
describes # 2d.state.saverestore.stack 2d.state.saverestore.stackdepth . If there is no saved state, the method must do nothing # 2d.state.saverestore.underflow .
The transformation matrix is applied to coordinates when creating shapes and paths.
When the context is created, the transformation matrix must initially be the identity transform. It may then be adjusted using the transformation methods.
The transformations must be performed in reverse order. For instance, if a scale transformation that doubles the width is applied, followed by a rotation transformation that rotates drawing operations by a quarter turn, and a rectangle twice as wide as it is tall is then drawn on the canvas, the actual result will be a square # 2d.transformation.order .
The scale(x, y)
method must add the
scaling transformation described by the arguments to the transformation
matrix # 2d.transformation.scale.basic 2d.transformation.scale.zero 2d.transformation.scale.negative 2d.transformation.scale.large . The x argument represents the scale factor in
the horizontal direction and the y argument represents
the scale factor in the vertical direction. The factors are multiples # 2d.transformation.scale.multiple .
The rotate(angle)
method must add the rotation
transformation described by the argument to the transformation matrix # 2d.transformation.rotate.zero 2d.transformation.rotate.wrap 2d.transformation.rotate.wrapnegative . The
angle argument represents a clockwise rotation angle # 2d.transformation.rotate.direction
expressed in radians # 2d.transformation.rotate.radians . If the angle argument is
infinite, the method call must be ignored.
The translate(x, y)
method must add the translation
transformation described by the arguments to the transformation matrix # 2d.transformation.translate.basic .
The x argument represents the translation distance in
the horizontal direction and the y argument represents
the translation distance in the vertical direction. The arguments are in
coordinate space units.
The transform(m11,
m12, m21, m22,
dx, dy)
method must
multiply # 2d.transformation.transform.multiply the current transformation matrix with the matrix described by # 2d.transformation.transform.identity 2d.transformation.transform.skewed :
m11 | m21 | dx |
m12 | m22 | dy |
0 | 0 | 1 |
The setTransform(m11, m12, m21, m22, dx, dy)
method must reset the current transform to
the identity matrix # 2d.transformation.setTransform.multiple , and then invoke the transform(m11, m12, m21, m22, dx, dy)
method with the same
arguments # 2d.transformation.setTransform.skewed .
All drawing operations are affected by the global compositing
attributes, globalAlpha
and globalCompositeOperation
# 2d.composite.operation.get .
The globalAlpha
attribute
gives an alpha value that is applied to shapes # 2d.composite.globalAlpha.fill and images # 2d.composite.globalAlpha.image 2d.composite.globalAlpha.canvas 2d.composite.globalAlpha.imagepattern 2d.composite.globalAlpha.canvaspattern before they are
composited onto the canvas. The value must be in the range from 0.0 (fully
transparent) to 1.0 (no additional transparency). If an attempt is made to
set the attribute to a value outside this range, the attribute must retain
its previous value # 2d.composite.globalAlpha.range 2d.composite.globalAlpha.invalid . When the context is created, the globalAlpha
attribute must initially have
the value 1.0 # 2d.composite.globalAlpha.default .
The globalCompositeOperation
attribute sets how shapes and images are drawn onto the existing bitmap,
once they have had globalAlpha
and the current transformation
matrix applied. It must be set to a value from the following list. In the
descriptions below, the source image, A, is the shape
or image being rendered, and the destination image, B,
is the current state of the bitmap.
source-atop
# 2d.composite.solid.source-atop 2d.composite.transparent.source-atop 2d.composite.image.source-atop 2d.composite.canvas.source-atop
source-in
# 2d.composite.solid.source-in 2d.composite.transparent.source-in 2d.composite.image.source-in 2d.composite.canvas.source-in 2d.composite.uncovered.fill.source-in 2d.composite.uncovered.image.source-in 2d.composite.uncovered.pattern.source-in
source-out
# 2d.composite.solid.source-out 2d.composite.transparent.source-out 2d.composite.image.source-out 2d.composite.canvas.source-out 2d.composite.uncovered.fill.source-out 2d.composite.uncovered.image.source-out 2d.composite.uncovered.pattern.source-out
source-over
# 2d.composite.solid.source-over 2d.composite.transparent.source-over 2d.composite.image.source-over 2d.composite.canvas.source-over (default)
destination-atop
# 2d.composite.solid.destination-atop 2d.composite.transparent.destination-atop 2d.composite.image.destination-atop 2d.composite.canvas.destination-atop 2d.composite.uncovered.fill.destination-atop 2d.composite.uncovered.image.destination-atop 2d.composite.uncovered.pattern.destination-atop
source-atop
but
using the destination image instead of the source image and vice versa.
destination-in
# 2d.composite.solid.destination-in 2d.composite.transparent.destination-in 2d.composite.image.destination-in 2d.composite.canvas.destination-in 2d.composite.uncovered.fill.destination-in 2d.composite.uncovered.image.destination-in 2d.composite.uncovered.pattern.destination-in
source-in
but using
the destination image instead of the source image and vice versa.
destination-out
# 2d.composite.solid.destination-out 2d.composite.transparent.destination-out 2d.composite.image.destination-out 2d.composite.canvas.destination-out
source-out
but
using the destination image instead of the source image and vice versa.
destination-over
# 2d.composite.solid.destination-over 2d.composite.transparent.destination-over 2d.composite.image.destination-over 2d.composite.canvas.destination-over
source-over
but
using the destination image instead of the source image and vice versa.lighter
# 2d.composite.solid.lighter 2d.composite.transparent.lighter 2d.composite.image.lighter 2d.composite.canvas.lighter
copy
# 2d.composite.solid.copy 2d.composite.transparent.copy 2d.composite.image.copy 2d.composite.canvas.copy 2d.composite.uncovered.fill.copy 2d.composite.uncovered.image.copy 2d.composite.uncovered.pattern.copy
xor
# 2d.composite.solid.xor 2d.composite.transparent.xor 2d.composite.image.xor 2d.composite.canvas.xor
vendorName-operationName
These values are all case-sensitive # 2d.composite.operation.casesensitive — they must be used exactly as shown. User agents must not recognize values that do not exactly match the values given above # 2d.composite.operation.nullsuffix .
The operators in the above list must be treated as described by the Porter-Duff operator given at the start of their description (e.g. A over B). [PORTERDUFF]
On setting, if the user agent does not recognize the specified value, it
must be ignored, leaving the value of globalCompositeOperation
unaffected # 2d.composite.operation.unrecognised 2d.composite.operation.darker 2d.composite.operation.over 2d.composite.operation.clear 2d.composite.operation.highlight .
When the context is created, the globalCompositeOperation
attribute must initially have the value source-over
# 2d.composite.operation.default .
The strokeStyle
attribute
represents the color or style to use for the lines around shapes, and the
fillStyle
attribute
represents the color or style to use inside the shapes.
Both attributes can be either strings, CanvasGradient
s, or CanvasPattern
s. On setting, strings must
be parsed as CSS <color> values and the color assigned # 2d.fillStyle.parse.html4 2d.fillStyle.parse.hex3 2d.fillStyle.parse.hex6 2d.fillStyle.parse.rgb-num 2d.fillStyle.parse.rgb-clamp-1 2d.fillStyle.parse.rgb-clamp-2 2d.fillStyle.parse.rgb-clamp-3 2d.fillStyle.parse.rgb-clamp-4 2d.fillStyle.parse.rgb-clamp-5 2d.fillStyle.parse.rgb-percent 2d.fillStyle.parse.rgba-solid-1 2d.fillStyle.parse.rgba-solid-2 2d.fillStyle.parse.rgba-num-1 2d.fillStyle.parse.rgba-num-2 2d.fillStyle.parse.rgba-percent 2d.fillStyle.parse.rgba-clamp-1 2d.fillStyle.parse.rgba-clamp-2 2d.fillStyle.parse.transparent-1 2d.fillStyle.parse.transparent-2 2d.fillStyle.parse.hsl-1 2d.fillStyle.parse.hsl-2 2d.fillStyle.parse.hsl-3 2d.fillStyle.parse.hsl-4 2d.fillStyle.parse.hsl-5 2d.fillStyle.parse.hsl-clamp-1 2d.fillStyle.parse.hsl-clamp-2 2d.fillStyle.parse.hsl-clamp-3 2d.fillStyle.parse.hsl-clamp-4 2d.fillStyle.parse.hsla-1 2d.fillStyle.parse.hsla-2 2d.fillStyle.parse.hsla-clamp-1 2d.fillStyle.parse.hsla-clamp-2 2d.fillStyle.parse.hsla-clamp-3 2d.fillStyle.parse.hsla-clamp-4 2d.fillStyle.parse.hsla-clamp-5 2d.fillStyle.parse.hsla-clamp-6 2d.fillStyle.parse.svg-1 2d.fillStyle.parse.svg-2 2d.fillStyle.parse.invalid.hex3 2d.fillStyle.parse.invalid.hex6 2d.fillStyle.parse.invalid.rgb-1 2d.fillStyle.parse.invalid.rgb-2 2d.fillStyle.parse.invalid.rgb-3 2d.fillStyle.parse.invalid.rgb-4 2d.fillStyle.parse.invalid.rgb-5 2d.fillStyle.parse.invalid.rgb-6 2d.fillStyle.parse.invalid.rgb-7 2d.fillStyle.parse.invalid.rgba-1 2d.fillStyle.parse.invalid.rgba-2 2d.fillStyle.parse.invalid.rgba-3 2d.fillStyle.parse.invalid.rgba-4 2d.fillStyle.parse.invalid.rgba-5 2d.fillStyle.parse.invalid.hsl-1 2d.fillStyle.parse.invalid.hsl-2 2d.fillStyle.parse.invalid.hsl-3 2d.fillStyle.parse.invalid.hsl-4 2d.fillStyle.parse.invalid.hsl-5 2d.fillStyle.parse.invalid.hsla-1 2d.fillStyle.parse.invalid.hsla-2 2d.fillStyle.parse.system 2d.fillStyle.parse.current.basic 2d.fillStyle.parse.current.changed 2d.fillStyle.parse.current.removed , and CanvasGradient
and CanvasPattern
objects must be assigned
themselves. [CSS3COLOR] If the value is a
string but is not a valid color # 2d.fillStyle.invalidstring , or is neither a string, a CanvasGradient
, nor a CanvasPattern
# 2d.fillStyle.invalidtype , then it must be ignored,
and the attribute must retain its previous value.
On getting, if the value is a color, then the serialization of the color must be
returned. Otherwise, if it is not a color but a CanvasGradient
# 2d.gradient.object.compare or CanvasPattern
# , then the respective
object must be returned. (Such objects are opaque and therefore only
useful for assigning to other attributes or for comparison to other
gradients or patterns.)
The serialization of a color for a color
value is a string, computed as follows: if it has alpha equal to 1.0, then
the string is a lowercase six-digit hex value # 2d.fillStyle.get.solid , prefixed with a "#"
character (U+0023 NUMBER SIGN), with the first two digits representing the
red component, the next two digits representing the green component, and
the last two digits representing the blue component, the digits being in
the range 0-9 a-f (U+0030 to U+0039 and U+0061 to U+0066). Otherwise, the
color value has alpha less than 1.0, and the string is the color value in
the CSS rgba()
functional-notation format: the
literal string rgba
(U+0072 U+0067 U+0062 U+0061)
followed by a U+0028 LEFT PARENTHESIS, a base-ten integer in the range
0-255 representing the red component (using digits 0-9, U+0030 to U+0039,
in the shortest form possible), a literal U+002C COMMA and U+0020 SPACE,
an integer for the green component, a comma and a space, an integer for
the blue component, another comma and space, a U+0030 DIGIT ZERO, a U+002E
FULL STOP (representing the decimal point), one or more digits in the
range 0-9 (U+0030 to U+0039) representing the fractional part of the alpha
value, and finally a U+0029 RIGHT PARENTHESIS # 2d.fillStyle.get.semitransparent 2d.fillStyle.get.transparent .
When the context is created, the strokeStyle
and fillStyle
attributes must initially have the string value #000000
# 2d.fillStyle.default 2d.strokeStyle.default .
There are two types of gradients, linear gradients and radial gradients,
both represented by objects implementing the opaque CanvasGradient
interface.
Once a gradient has been created (see below), stops are placed along it to define how the colors are distributed along the gradient. The color of the gradient at each stop is the color specified for that stop. Between each such stop, the colors and the alpha component must be linearly interpolated # 2d.gradient.interpolate.solid 2d.gradient.interpolate.colour 2d.gradient.interpolate.alpha 2d.gradient.interpolate.vertical 2d.gradient.interpolate.multiple over the RGBA space without premultiplying the alpha value # 2d.gradient.interpolate.colouralpha to find the color to use at that offset. Before the first stop, the color must be the color of the first stop # 2d.gradient.interpolate.outside . After the last stop, the color must be the color of the last stop # 2d.gradient.interpolate.outside . When there are no stops, the gradient is transparent black # 2d.gradient.empty .
The addColorStop(offset, color)
method on
the CanvasGradient
interface
adds a new stop to a gradient. If the offset is less
than 0, greater than 1, infinite, or NaN, then an
INDEX_SIZE_ERR
exception must be raised # 2d.gradient.object.invalidoffset . If the color cannot be parsed as a CSS color, then a
SYNTAX_ERR
exception must be raised # 2d.gradient.object.invalidcolour . Otherwise, the gradient
must have a new stop placed, at offset offset relative
to the whole gradient, and with the color obtained by parsing color as a CSS <color> value # 2d.gradient.object.update . If multiple stops are
added at the same offset on a gradient, they must be placed in the order
added, with the first one closest to the start of the gradient, and each
subsequent one infinitesimally further along towards the end point (in
effect causing all but the first and last stop added at each point to be
ignored) # 2d.gradient.interpolate.overlap 2d.gradient.interpolate.overlap2 .
The createLinearGradient(x0, y0, x1, y1)
method takes four arguments that represent
the start point (x0, y0) and end
point (x1, y1) of the gradient. If
any of the arguments to createLinearGradient()
are
infinite or NaN, the method must raise a NOT_SUPPORTED_ERR
exception # 2d.gradient.linear.nonfinite . Otherwise, the method must return a linear CanvasGradient
# 2d.gradient.object.return initialized with the
specified line.
Linear gradients must be rendered such that all points on a line perpendicular to the line that crosses the start and end points have the color at the point where those two lines cross (with the colors coming from the interpolation and extrapolation described above). The points in the linear gradient must be transformed as described by the current transformation matrix when rendering # 2d.gradient.linear.transform.1 2d.gradient.linear.transform.2 2d.gradient.linear.transform.3 .
If x0 = x1 and y0 = y1, then the linear gradient must paint nothing # 2d.gradient.interpolate.zerosize .
The createRadialGradient(x0, y0, r0, x1, y1, r1)
method takes six arguments, the first
three representing the start circle with origin (x0,
y0) and radius r0, and the last
three representing the end circle with origin (x1,
y1) and radius r1. The values are
in coordinate space units. If any of the arguments are infinite or NaN, a
NOT_SUPPORTED_ERR
exception must be raised # 2d.gradient.radial.nonfinite . If either of r0 or r1 are negative, an
INDEX_SIZE_ERR
exception must be raised # 2d.gradient.radial.negative . Otherwise, the
method must return a radial CanvasGradient
# 2d.gradient.object.return initialized with the two
specified circles.
Radial gradients must be rendered by following these steps # 2d.gradient.radial.inside1 2d.gradient.radial.inside2 2d.gradient.radial.inside3 2d.gradient.radial.outside1 2d.gradient.radial.outside2 2d.gradient.radial.outside3 2d.gradient.radial.touch1 2d.gradient.radial.touch2 2d.gradient.radial.touch3 2d.gradient.radial.cone.behind 2d.gradient.radial.cone.front 2d.gradient.radial.cone.bottom 2d.gradient.radial.cone.top 2d.gradient.radial.cone.beside 2d.gradient.radial.cone.cylinder 2d.gradient.radial.cone.shape1 2d.gradient.radial.cone.shape2 :
If x0 = x1 and y0 = y1 and r0 = r1, then the radial gradient must paint nothing # 2d.gradient.radial.equal . Abort these steps.
Let x(ω) = (x1-x0)ω + x0
Let y(ω) = (y1-y0)ω + y0
Let r(ω) = (r1-r0)ω + r0
Let the color at ω be the color at that position on the gradient (with the colors coming from the interpolation and extrapolation described above).
For all values of ω where r(ω) > 0, starting with the value of ω nearest to positive infinity and ending with the value of ω nearest to negative infinity, draw the circumference of the circle with radius r(ω) at position (x(ω), y(ω)), with the color at ω, but only painting on the parts of the canvas that have not yet been painted on by earlier circles in this step for this rendering of the gradient.
This effectively creates a cone, touched by the two circles defined in the creation of the gradient, with the part of the cone before the start circle (0.0) using the color of the first offset, the part of the cone after the end circle (1.0) using the color of the last offset, and areas outside the cone untouched by the gradient (transparent black).
Gradients must be painted only where the relevant stroking or filling effects requires that they be drawn.
The points in the radial gradient must be transformed as described by the current transformation matrix when rendering # 2d.gradient.radial.transform.1 2d.gradient.radial.transform.2 2d.gradient.radial.transform.3 .
Patterns are represented by objects implementing the opaque CanvasPattern
interface.
To create objects of this type, the createPattern(image, repetition)
method
is used. The first argument gives the image to use as the pattern (either
an HTMLImageElement
or an
HTMLCanvasElement
).
Modifying this image after calling the createPattern()
method must not affect
the pattern # 2d.pattern.modify.image1 2d.pattern.modify.image2 2d.pattern.modify.canvas1 2d.pattern.modify.canvas2 . The second argument must be a string with one of the
following values: repeat
, repeat-x
, repeat-y
, no-repeat
. If the empty string or null is specified, repeat
must be assumed # 2d.pattern.repeat.empty 2d.pattern.repeat.null . If an unrecognized value is given,
then the user agent must raise a SYNTAX_ERR
exception # 2d.pattern.repeat.undefined 2d.pattern.repeat.unrecognised . User
agents must recognize the four values described above exactly (e.g. they
must not do case folding) # 2d.pattern.repeat.case 2d.pattern.repeat.nullsuffix . The method must return a CanvasPattern
object suitably
initialized # 2d.pattern.basic.type .
The image argument must be an instance of an
HTMLImageElement
or HTMLCanvasElement
. If the image is of the wrong type or null, the implementation must
raise a TYPE_MISMATCH_ERR
exception # 2d.pattern.image.undefined 2d.pattern.image.null 2d.pattern.image.string .
If the image argument is an HTMLImageElement
object whose complete
attribute
is false, then the implementation must raise an
INVALID_STATE_ERR
exception # 2d.pattern.image.incomplete 2d.pattern.image.broken .
If the image argument is an HTMLCanvasElement
object with either
a horizontal dimension or a vertical dimension equal to zero, then the
implementation must raise an INVALID_STATE_ERR
exception # 2d.pattern.basic.zerocanvas .
Patterns must be painted so that the top left of the first image is
anchored at the origin of the coordinate space, and images are then
repeated horizontally to the left and right (if the repeat-x
string was specified) or vertically up and down (if the
repeat-y
string was specified) or in all four directions all
over the canvas (if the repeat
string was specified) # 2d.pattern.basic.image 2d.pattern.basic.canvas 2d.pattern.basic.nocontext 2d.pattern.paint.norepeat.basic 2d.pattern.paint.norepeat.outside 2d.pattern.paint.norepeat.coord1 2d.pattern.paint.norepeat.coord2 2d.pattern.paint.norepeat.coord3 2d.pattern.paint.repeat.basic 2d.pattern.paint.repeat.outside 2d.pattern.paint.repeat.coord1 2d.pattern.paint.repeat.coord2 2d.pattern.paint.repeat.coord3 2d.pattern.paint.repeatx.basic 2d.pattern.paint.repeatx.outside 2d.pattern.paint.repeatx.coord1 2d.pattern.paint.repeaty.basic 2d.pattern.paint.repeaty.outside 2d.pattern.paint.repeaty.coord1 2d.pattern.paint.orientation.image 2d.pattern.paint.orientation.canvas . The
images are not scaled by this process; one CSS pixel of the image must be
painted on one coordinate space unit # . Of course, patterns must actually be
painted only where the stroking or filling effect requires that they be
drawn # , and are affected by the current transformation matrix.
When the createPattern()
method is passed, as its
image argument, an animated image, the poster frame of
the animation, or the first frame of the animation if there is no poster
frame, must be used # 2d.pattern.animated.gif .
Support for patterns is optional. If the user agent doesn't support
patterns, then createPattern()
must return null # .
The lineWidth
attribute
gives the width of lines, in coordinate space units # 2d.line.width.basic 2d.line.width.transformed . On setting, zero,
negative, infinite, and NaN values must be ignored, leaving the value
unchanged # 2d.line.width.invalid .
When the context is created, the lineWidth
attribute must initially have the
value 1.0
# 2d.line.defaults .
The lineCap
attribute defines
the type of endings that UAs will place on the end of lines # 2d.line.cap.open 2d.line.cap.closed . The three
valid values are butt
, round
, and
square
. The butt
value means that the end of
each line has a flat edge perpendicular to the direction of the line (and
that no additional line cap is added) # 2d.line.cap.butt . The round
value means
that a semi-circle with the diameter equal to the width of the line must
then be added on to the end of the line # 2d.line.cap.round . The square
value
means that a rectangle with the length of the line width and the width of
half the line width, placed flat against the edge perpendicular to the
direction of the line, must be added at the end of each line # 2d.line.cap.square . On setting,
any other value than the literal strings butt
,
round
, and square
must be ignored, leaving the
value unchanged # 2d.line.cap.invalid .
When the context is created, the lineCap
attribute must initially have the value
butt
# 2d.line.defaults .
The lineJoin
attribute
defines the type of corners that UAs will place where two lines meet. The
three valid values are bevel
, round
, and
miter
.
On setting, any other value than the literal strings bevel
,
round
, and miter
must be ignored, leaving the
value unchanged # 2d.line.join.invalid .
When the context is created, the lineJoin
attribute must initially have the
value miter
# 2d.line.defaults .
A join exists at any point in a subpath shared by two consecutive lines # 2d.line.join.open 2d.line.join.parallel . When a subpath is closed, then a join also exists at its first point (equivalent to its last point) connecting the first and last lines in the subpath # 2d.line.join.closed .
In addition to the point where the join occurs, two additional points are relevant to each join, one for each line: the two corners found half the line width away from the join point, one perpendicular to each line, each on the side furthest from the other line.
A filled triangle connecting these two opposite corners with a straight
line, with the third point of the triangle being the join point, must be
rendered at all joins # 2d.line.join.bevel . The lineJoin
attribute controls whether anything
else is rendered. The three aforementioned values have the following
meanings:
The bevel
value means that this is all that is rendered at
joins # 2d.line.join.bevel .
The round
value means that a filled arc connecting the two
aforementioned corners of the join, abutting (and not overlapping) the
aforementioned triangle, with the diameter equal to the line width and the
origin at the point of the join, must be rendered at joins # 2d.line.join.round .
The miter
value means that a second filled triangle must
(if it can given the miter length) be rendered at the join, with one line
being the line between the two aforementioned corners, abutting the first
triangle, and the other two being continuations of the outside edges of
the two joining lines, as long as required to intersect without going over
the miter length # 2d.line.join.miter 2d.line.miter.exceeded 2d.line.miter.acute 2d.line.miter.obtuse 2d.line.miter.rightangle 2d.line.miter.lineedge 2d.line.miter.within .
The miter length is the distance from the point where the lines touch on the inside of the join to the intersection of the line edges on the outside of the join. The miter limit ratio is the maximum allowed ratio of the miter length to half the line width. If the miter length would cause the miter limit ratio to be exceeded, this second triangle must not be rendered # 2d.line.miter.exceeded 2d.line.miter.acute 2d.line.miter.obtuse .
The miter limit ratio can be explicitly set using the miterLimit
attribute.
On setting, zero, negative, infinite, and NaN values must be ignored,
leaving the value unchanged # 2d.line.miter.invalid .
When the context is created, the miterLimit
attribute must initially have the
value 10.0
# 2d.line.defaults .
All drawing operations are affected by the four global shadow attributes.
The shadowColor
attribute
sets the color of the shadow.
When the context is created, the shadowColor
attribute initially must be
fully-transparent black.
On getting, the serialization of the color must be returned.
On setting, the new value must be parsed as a CSS <color> value and the color assigned. If the value is not a valid color, then it must be ignored, and the attribute must retain its previous value. [CSS3COLOR]
The shadowOffsetX
and
shadowOffsetY
attributes specify the distance that the shadow will be offset in the
positive horizontal and positive vertical distance respectively. Their
values are in coordinate space units. They are not affected by the current
transformation matrix.
When the context is created, the shadow offset attributes must initially
have the value 0
.
On getting, they must return their current value. On setting, the attribute being set must be set to the new value, except if the value is infinite or NaN, in which case the new value must be ignored.
The shadowBlur
attribute
specifies the size of the blurring effect. (The units do not map to
coordinate space units, and are not affected by the current transformation
matrix.)
When the context is created, the shadowBlur
attribute must initially have the
value 0
.
On getting, the attribute must return its current value. On setting the attribute must be set to the new value, except if the value is negative, infinite or NaN, in which case the new value must be ignored.
When shadows are drawn, they must be rendered as follows:
Let A be the source image for which a shadow is being created.
Let B be an infinite transparent black bitmap, with a coordinate space and an origin identical to A.
Copy the alpha channel of A to B, offset by shadowOffsetX
in the positive x direction, and shadowOffsetY
in the positive y direction.
If shadowBlur
is greater than 0:
If shadowBlur
is less than 8, let σ be half the value of shadowBlur
; otherwise, let σ be the square root of multiplying the value of
shadowBlur
by 2.
Perform a 2D Gaussian Blur on B, using σ as the standard deviation.
User agents may limit values of σ to an implementation-specific maximum value to avoid exceeding hardware limitations during the Gaussian blur operation.
Set the red, green, and blue components of every pixel in B to the red, green, and blue components (respectively)
of the color of shadowColor
.
Multiply the alpha component of every pixel in B
by the alpha component of the color of shadowColor
.
The shadow is in the bitmap B, and is rendered as part of the drawing model described below.
There are three methods that immediately draw rectangles to the bitmap. They each take four arguments; the first two give the x and y coordinates of the top left of the rectangle, and the second two give the width w and height h of the rectangle, respectively.
The current transformation matrix must be applied to the following four coordinates, which form the path that must then be closed to get the specified rectangle: (x, y), (x+w, y), (x+w, y+h), (x, y+h).
Shapes are painted without affecting the current path, and are subject
to the clipping region,
and, with the exception of clearRect()
, also shadow effects, global alpha, and global composition
operators.
The clearRect(x, y, w, h)
method must clear the pixels in the
specified rectangle that also intersect the current clipping region to a
fully transparent black, erasing any previous image # 2d.clearRect.basic 2d.clearRect.path 2d.clearRect.zero 2d.clearRect.negative 2d.clearRect.transform 2d.clearRect.globalalpha 2d.clearRect.globalcomposite 2d.clearRect.clip 2d.clearRect.shadow . If either height or
width are zero, this method has no effect.
The fillRect(x, y, w, h)
method must paint the specified rectangular
area using the fillStyle
# 2d.fillRect.basic 2d.fillRect.path 2d.fillRect.zero 2d.fillRect.negative 2d.fillRect.transform 2d.fillRect.clip 2d.fillRect.shadow . If either height or width are
zero, this method has no effect.
The strokeRect(x,
y, w, h)
method must stroke the specified
rectangle's path using the strokeStyle
, lineWidth
,
lineJoin
, and (if appropriate) miterLimit
attributes # 2d.strokeRect.basic 2d.strokeRect.path 2d.strokeRect.zero.1 2d.strokeRect.zero.2 2d.strokeRect.zero.3 2d.strokeRect.zero.4 2d.strokeRect.zero.5 2d.strokeRect.negative 2d.strokeRect.transform 2d.strokeRect.globalalpha 2d.strokeRect.globalcomposite 2d.strokeRect.clip 2d.strokeRect.shadow . If both height and
width are zero, this method has no effect, since there is no path to
stroke (it's a point). If only one of the two is zero, then the method
will draw a line instead (the path for the outline is just a straight line
along the non-zero dimension).
The context always has a current path. There is only one current path, it is not part of the drawing state.
A path has a list of zero or more subpaths. Each subpath consists of a list of one or more points, connected by straight or curved lines, and a flag indicating whether the subpath is closed or not. A closed subpath is one where the last point of the subpath is connected to the first point of the subpath by a straight line. Subpaths with fewer than two points are ignored when painting the path.
Initially, the context's path must have zero subpaths # 2d.path.initial .
The points and lines added to the path by these methods must be transformed according to the current transformation matrix as they are added # 2d.path.arc.scale.1 2d.path.stroke.scale1 2d.path.stroke.scale2 2d.path.stroke.skew 2d.path.transformation.basic 2d.path.transformation.multiple 2d.path.transformation.changing .
The beginPath()
method must
empty the list of subpaths so that the context once again has zero
subpaths # 2d.path.beginPath .
The moveTo(x, y)
method must create a
new subpath with the specified point as its first (and only) point # 2d.path.moveTo.basic 2d.path.moveTo.newsubpath 2d.path.moveTo.multiple .
The closePath()
method must
do nothing if the context has no subpaths # 2d.path.closePath.empty . Otherwise, it must mark the
last subpath as closed, create a new subpath whose first point is the same
as the previous subpath's first point, and finally add this new subpath to
the path # 2d.path.closePath.newline 2d.path.closePath.nextpoint . (If the last subpath had more than one point in its list of
points, then this is equivalent to adding a straight line connecting the
last point back to the first point, thus "closing" the shape, and then
repeating the last moveTo()
call.)
New points and the lines connecting them are added to subpaths using the methods described below. In all cases, the methods only modify the last subpath in the context's paths.
The lineTo(x, y)
method must do
nothing if the context has no subpaths # 2d.path.lineTo.emptysubpath . Otherwise, it must connect the
last point in the subpath to the given point (x, y) using a straight line, and must then add the given point
(x, y) to the subpath # 2d.path.lineTo.basic 2d.path.lineTo.nextpoint .
The quadraticCurveTo(cpx, cpy, x, y)
method must do nothing if the context has
no subpaths # 2d.path.quadraticCurveTo.emptysubpath . Otherwise it must connect the last point in the subpath to
the given point (x, y) using a
quadratic Bézier curve with control point (cpx,
cpy), and must then add the given point (x, y) to the subpath # 2d.path.quadraticCurveTo.basic 2d.path.quadraticCurveTo.shape 2d.path.quadraticCurveTo.scaled . [BEZIER]
The bezierCurveTo(cp1x, cp1y, cp2x,
cp2y, x, y)
method must do nothing if the context has
no subpaths # 2d.path.bezierCurveTo.emptysubpath . Otherwise, it must connect the last point in the subpath to
the given point (x, y) using a
cubic Bézier curve with control points (cp1x,
cp1y) and (cp2x, cp2y). Then, it must add the point (x,
y) to the subpath # 2d.path.bezierCurveTo.basic 2d.path.bezierCurveTo.shape 2d.path.bezierCurveTo.scaled . [BEZIER]
The arcTo(x1, y1, x2, y2, radius)
method must do
nothing if the context has no subpaths # 2d.path.arcTo.emptysubpath . If the context does have
a subpath, then the behavior depends on the arguments and the last point
in the subpath.
Negative values for radius must cause the
implementation to raise an INDEX_SIZE_ERR
exception # 2d.path.arcTo.negative .
Let the point (x0, y0) be the last point in the subpath.
If the point (x0, y0) is equal to the point (x1, y1) # 2d.path.arcTo.coincide.1 , or if the point (x1, y1) is equal to the point (x2, y2) # 2d.path.arcTo.coincide.2 , or if the radius radius is zero # 2d.path.arcTo.zero.1 2d.path.arcTo.zero.2 , then the method must add the point (x1, y1) to the subpath, and connect that point to the previous point (x0, y0) by a straight line.
Otherwise, if the points (x0, y0), (x1, y1), and (x2, y2) all lie on a single straight line, then: if the direction from (x0, y0) to (x1, y1) is the same as the direction from (x1, y1) to (x2, y2), then the method must add the point (x1, y1) to the subpath, and connect that point to the previous point (x0, y0) by a straight line # 2d.path.arcTo.collinear.1 ; otherwise, the direction from (x0, y0) to (x1, y1) is the opposite of the direction from (x1, y1) to (x2, y2), and the method must add a point (x∞, y∞) to the subpath, and connect that point to the previous point (x0, y0) by a straight line, where (x∞, y∞) is the point that is infinitely far away from (x1, y1), that lies on the same line as (x0, y0), (x1, y1), and (x2, y2), and that is on the same side of (x1, y1) on that line as (x2, y2) # 2d.path.arcTo.collinear.2 2d.path.arcTo.collinear.3 .
Otherwise, let The Arc be the shortest arc given by circumference of the circle that has radius radius, and that has one point tangent to the half-infinite line that crosses the point (x0, y0) and ends at the point (x1, y1), and that has a different point tangent to the half-infinite line that ends at the point (x1, y1) and crosses the point (x2, y2). The points at which this circle touches these two lines are called the start and end tangent points respectively.
The method must connect the point (x0, y0) to the start tangent point by a straight line, adding the start tangent point to the subpath, and then must connect the start tangent point to the end tangent point by The Arc, adding the end tangent point to the subpath # 2d.path.arcTo.shape.curve1 2d.path.arcTo.shape.curve2 2d.path.arcTo.shape.start 2d.path.arcTo.shape.end .
The arc(x, y, radius, startAngle, endAngle, anticlockwise)
method draws an arc. If the
context has any subpaths, then the method must add a straight line from
the last point in the subpath to the start point of the arc # 2d.path.arc.empty 2d.path.arc.nonempty . In any case,
it must draw the arc between the start point of the arc and the end point
of the arc, and add the start and end points of the arc to the subpath # 2d.path.arc.end 2d.path.arc.angle.1 2d.path.arc.angle.2 2d.path.arc.angle.3 2d.path.arc.angle.4 2d.path.arc.angle.5 2d.path.arc.angle.6 2d.path.arc.zero.1 2d.path.arc.zero.2 2d.path.arc.twopie.1 2d.path.arc.twopie.2 2d.path.arc.twopie.3 2d.path.arc.twopie.4 2d.path.arc.shape.1 2d.path.arc.shape.2 2d.path.arc.shape.3 2d.path.arc.shape.4 2d.path.arc.shape.5 2d.path.arc.selfintersect.1 2d.path.arc.selfintersect.2 2d.path.arc.scale.2 .
The arc and its start and end points are defined as follows:
Consider a circle that has its origin at (x, y) and that has radius radius. The points at startAngle and endAngle along this circle's circumference, measured in radians clockwise from the positive x-axis, are the start and end points respectively.
If the anticlockwise argument is false and endAngle-startAngle is equal to or greater than 2π, or, if the anticlockwise argument is true and startAngle-endAngle is equal to or greater than 2π, then the arc is the whole circumference of this circle.
Otherwise, the arc is the path along the circumference of this circle from the start point to the end point, going anti-clockwise if the anticlockwise argument is true, and clockwise otherwise. Since the points are on the circle, as opposed to being simply angles from zero, the arc can never cover an angle greater than 2π radians. If the two points are the same, or if the radius is zero # 2d.path.arc.zeroradius , then the arc is defined as being of zero length in both directions.
Negative values for radius must cause the
implementation to raise an INDEX_SIZE_ERR
exception # 2d.path.arc.negative .
The rect(x, y, w, h)
method must create a new subpath containing
just the four points (x, y), (x+w, y), (x+w, y+h), (x, y+h), with those four points connected by straight lines # 2d.path.rect.basic 2d.path.rect.newsubpath 2d.path.rect.zero.1 2d.path.rect.zero.2 2d.path.rect.zero.3 2d.path.rect.zero.4 2d.path.rect.zero.5 2d.path.rect.zero.6 2d.path.rect.negative 2d.path.rect.winding , and
must then mark the subpath as closed # 2d.path.rect.closed . It must then create a new subpath
with the point (x, y) as the only
point in the subpath # 2d.path.rect.end.1 2d.path.rect.end.2 .
The fill()
method must fill all the subpaths of the current path, using fillStyle
,
and using the non-zero winding number rule # 2d.path.fill.overlap 2d.path.fill.winding.add 2d.path.fill.winding.subtract.1 2d.path.fill.winding.subtract.2 2d.path.fill.winding.subtract.3 . Open subpaths must be
implicitly closed when being filled (without affecting the actual
subpaths) # 2d.path.fill.closed.basic 2d.path.fill.closed.unaffected .
Thus, if two overlapping but otherwise independent subpaths have opposite windings, they cancel out and result in no fill. If they have the same winding, that area just gets painted once.
The stroke()
method must
calculate the strokes of all the subpaths of the current path, using the
lineWidth
, lineCap
, lineJoin
, and
(if appropriate) miterLimit
attributes, and then fill the
combined stroke area using the strokeStyle
, attribute # 2d.path.stroke.overlap 2d.path.stroke.union 2d.path.stroke.unaffected .
Since the subpaths are all stroked as one, overlapping parts of the paths in one stroke operation are treated as if their union was what was painted.
Paths, when filled or stroked, must be painted without affecting the current path # , and must be subject to shadow effects, global alpha, the clipping region, and global composition operators # . (Transformations affect the path when the path is created, not when it is painted, though the stroke style is still affected by the transformation during painting.)
Zero-length line segments must be pruned before stroking a path # 2d.path.stroke.prune.line 2d.path.stroke.prune.closed 2d.path.stroke.prune.curve 2d.path.stroke.prune.arc 2d.path.stroke.prune.rect 2d.path.stroke.prune.corner . Empty subpaths must be ignored # 2d.path.stroke.empty .
The clip()
method must create a new clipping region by
calculating the intersection of the current clipping region and the area
described by the current path, using the non-zero winding number rule # 2d.path.clip.empty 2d.path.clip.basic.1 2d.path.clip.basic.2 2d.path.clip.intersect 2d.path.clip.winding.1 2d.path.clip.winding.2 .
Open subpaths must be implicitly closed when computing the clipping
region, without affecting the actual subpaths # 2d.path.clip.unaffected . The new clipping region
replaces the current clipping region.
When the context is initialized, the clipping region must be set to the rectangle with the top left corner at (0,0) and the width and height of the coordinate space # .
The isPointInPath(x, y)
method must return
true if the point given by the x and y coordinates passed to the method, when treated as
coordinates in the canvas coordinate space unaffected by the current
transformation, is inside the current path; and must return false
otherwise # 2d.path.isPointInPath.basic.1 2d.path.isPointInPath.basic.2 2d.path.isPointInPath.empty 2d.path.isPointInPath.subpath 2d.path.isPointInPath.outside 2d.path.isPointInPath.unclosed 2d.path.isPointInPath.winding 2d.path.isPointInPath.transform.1 2d.path.isPointInPath.transform.2 2d.path.isPointInPath.transform.3 . Points on the path itself are considered to be inside the path # 2d.path.isPointInPath.edge .
If either of the arguments is infinite or NaN, then the method must return
false # 2d.path.isPointInPath.nonfinite .
The font
DOM
attribute, on setting, must be parsed the same way as the 'font' property
of CSS (but without supporting property-independent stylesheet syntax like
'inherit'), and the resulting font must be assigned to the context, with
the 'line-height' component forced to 'normal'. [CSS]
Font names must be interpreted in the context of the canvas
element's stylesheets; any fonts embedded
using @font-face
must therefore be available. [CSSWEBFONTS]
Only vector fonts should be used by the user agent; if a user agent were to use bitmap fonts then transformations would likely make the font look very ugly.
On getting, the font
attribute must return the serialized form of
the current font of the context. [CSSOM]
When the context is created, the font of the context must be set to 10px
sans-serif. When the 'font-size' component is set to lengths using
percentages, 'em' or 'ex' units, or the 'larger' or 'smaller' keywords,
these must be interpreted relative to the computed value of the
'font-size' property of the corresponding canvas
element at the time that the attribute is
set. When the 'font-weight' component is set to the relative values
'bolder' and 'lighter', these must be interpreted relative to the computed
value of the 'font-weight' property of the corresponding canvas
element at the time that the attribute is
set. If the computed values are undefined for a particular case (e.g.
because the canvas
element is not in a
document), then the relative keywords must be interpreted relative to the
normal-weight 10px sans-serif default.
The textAlign
DOM attribute,
on getting, must return the current value. On setting, if the value is one
of start
, end
, left
, right
, or center
, then the value must be changed to the new value.
Otherwise, the new value must be ignored. When the context is created, the
textAlign
attribute must initially have the
value start
.
The textBaseline
DOM
attribute, on getting, must return the current value. On setting, if the
value is one of top
, hanging
, middle
, alphabetic
, ideographic
, or bottom
, then the value must be changed to the
new value. Otherwise, the new value must be ignored. When the context is
created, the textBaseline
attribute must initially have
the value alphabetic
.
The textBaseline
attribute's allowed keywords
correspond to alignment points in the font:
The keywords map to these alignment points as follows:
top
hanging
middle
alphabetic
ideographic
bottom
The fillText()
and strokeText()
methods
take three or four arguments, text, x, y, and optionally maxWidth, and render the given text at
the given (x, y) coordinates
ensuring that the text isn't wider than maxWidth if
specified, using the current font
, textAlign
, and textBaseline
values. Specifically, when
the methods are called, the user agent must run the following steps:
Let font be the current font of the browsing
context, as given by the font
attribute.
Replace all the space characters in text with U+0020 SPACE characters.
Form a hypothetical infinitely wide CSS line box containing a single
inline box containing the text text, with all the
properties at their initial values except the 'font' property of the
inline element set to font and the 'direction'
property of the inline element set to the 'direction' property of the
canvas
element. [CSS]
If the maxWidth argument was specified and the hypothetical width of the inline box in the hypothetical line box is greater than maxWidth CSS pixels, then change font to have a more condensed font (if one is available or if a reasonably readable one can be synthesized by applying a horizontal scale factor to the font) or a smaller font, and return to the previous step.
Let the anchor point be a point on the inline box,
determined by the textAlign
and textBaseline
values, as follows:
Horizontal position:
textAlign
is left
textAlign
is start
and the 'direction' property on the canvas
element has a computed value of 'ltr'
textAlign
is end
and
the 'direction' property on the canvas
element has a computed value of 'rtl'
textAlign
is right
textAlign
is end
and
the 'direction' property on the canvas
element has a computed value of 'ltr'
textAlign
is start
and the 'direction' property on the canvas
element has a computed value of 'rtl'
textAlign
is center
Vertical position:
textBaseline
is top
textBaseline
is hanging
textBaseline
is middle
textBaseline
is alphabetic
textBaseline
is ideographic
textBaseline
is bottom
Paint the hypothetical inline box as the shape given by the text's glyphs, as transformed by the current transformation matrix, and anchored and sized so that before applying the current transformation matrix, the anchor point is at (x, y) and each CSS pixel is mapped to one coordinate space unit.
For fillText()
fillStyle
must be applied to the glyphs and strokeStyle
must be ignored. For strokeText()
the reverse holds and strokeStyle
must be applied to the glyph
outlines and fillStyle
must be ignored.
Text is painted without affecting the current path, and is subject to shadow effects, global alpha, the clipping region, and global composition operators.
The measureText()
method
takes one argument, text. When the method is invoked,
the user agent must replace all the space characters in text with U+0020
SPACE characters, and then must form a hypothetical infinitely wide CSS
line box containing a single inline box containing the text text, with all the properties at their initial values
except the 'font' property of the inline element set to the current font
of the browsing context, as given by the font
attribute, and
must then return a new TextMetrics
object with its width
attribute set to the width of that inline
box, in CSS pixels. [CSS]
The TextMetrics
interface is
used for the objects returned from measureText()
. It has one attribute, width
, which is
set by the measureText()
method.
Glyphs rendered using fillText()
and strokeText()
can spill out of the box given
by the font size (the em square size) and the width returned by measureText()
(the text width). This
version of the specification does not provide a way to obtain the bounding
box dimensions of the text. If the text is to be rendered and removed,
care needs to be taken to replace the entire area of the canvas that the
clipping region covers, not just the box given by the em square height and
measured text width.
A future version of the 2D context API may provide a way to render fragments of documents, rendered using CSS, straight to the canvas. This would be provided in preference to a dedicated way of doing multiline layout.
To draw images onto the canvas, the drawImage
method can be
used.
This method is overloaded with three variants: drawImage(image, dx, dy)
, drawImage(image, dx, dy, dw, dh)
, and drawImage(image, sx, sy, sw, sh, dx, dy, dw, dh)
. (Actually it is overloaded with six; each of
those three can take either an HTMLImageElement
or an HTMLCanvasElement
for the image argument.) If not specified, the dw and dh arguments must default to the
values of sw and sh, interpreted
such that one CSS pixel in the image is treated as one unit in the canvas
coordinate space # 2d.drawImage.3arg . If the sx, sy,
sw, and sh arguments are omitted,
they must default to 0, 0, the image's intrinsic width in image pixels,
and the image's intrinsic height in image pixels, respectively # 2d.drawImage.3arg 2d.drawImage.5arg .
The image argument must be an instance of an
HTMLImageElement
or HTMLCanvasElement
. If the image is of the wrong type or null, the implementation must
raise a TYPE_MISMATCH_ERR
exception # 2d.drawImage.null 2d.drawImage.wrongtype .
If the image argument is an HTMLImageElement
object whose complete
attribute
is false, then the implementation must raise an
INVALID_STATE_ERR
exception # 2d.drawImage.incomplete 2d.drawImage.broken .
The source rectangle is the rectangle whose corners are the four points (sx, sy), (sx+sw, sy), (sx+sw, sy+sh), (sx, sy+sh).
If the source rectangle is not entirely within the source image # 2d.drawImage.outsidesource , or if
one of the sw or sh arguments is
zero # 2d.drawImage.zerosource , the implementation must raise an INDEX_SIZE_ERR
exception.
The destination rectangle is the rectangle whose corners are the four points (dx, dy), (dx+dw, dy), (dx+dw, dy+dh), (dx, dy+dh).
When drawImage()
is invoked, the region of the
image specified by the source rectangle must be painted on the region of
the canvas specified by the destination rectangle # 2d.drawImage.9arg.basic 2d.drawImage.9arg.sourcepos 2d.drawImage.9arg.sourcesize 2d.drawImage.9arg.destpos 2d.drawImage.9arg.destsize 2d.drawImage.canvas 2d.drawImage.floatsource , after applying the current
transformation matrix to the points of the destination rectangle.
When a canvas is drawn onto itself, the drawing model requires the source to be copied before the image is drawn back onto the canvas, so it is possible to copy parts of a canvas onto overlapping parts of itself.
When the drawImage()
method is passed, as its image argument, an animated image, the poster frame of the
animation, or the first frame of the animation if there is no poster
frame, must be used # 2d.drawImage.animated.gif 2d.drawImage.animated.apng 2d.drawImage.animated.poster .
Images are painted without affecting the current path # 2d.drawImage.path , and are subject to shadow effects, global alpha, the clipping region, and global composition operators # 2d.drawImage.transform 2d.drawImage.alpha 2d.drawImage.clip 2d.drawImage.composite .
The createImageData(sw, sh)
method must return
an ImageData
object # 2d.imageData.create.basic 2d.imageData.create.type representing a
rectangle with a width in CSS pixels equal to the absolute magnitude of
sw and a height in CSS pixels equal to the absolute
magnitude of sh # 2d.imageData.create.initial 2d.imageData.create.large 2d.imageData.create.tiny 2d.imageData.create.negative , filled with transparent black # 2d.imageData.create.initial .
The getImageData(sx, sy, sw, sh)
method must return an ImageData
object # 2d.imageData.get.type representing the underlying
pixel data for the area of the canvas denoted by the rectangle whose
corners are the four points (sx, sy), (sx+sw, sy), (sx+sw, sy+sh), (sx,
sy+sh), in canvas
coordinate space units # 2d.imageData.get.basic 2d.imageData.get.source.outside 2d.imageData.get.source.negative 2d.imageData.get.source.size . Pixels outside the canvas must be returned as
transparent black # 2d.imageData.get.source.outside . Pixels must be returned as non-premultiplied alpha
values # 2d.imageData.get.nonpremul .
If any of the arguments to createImageData()
or getImageData()
are infinite or NaN, the
method must instead raise a NOT_SUPPORTED_ERR
exception # 2d.imageData.create.nonfinite 2d.imageData.get.nonfinite . If
either the sw or sh arguments are
zero, the method must instead raise an INDEX_SIZE_ERR
exception # 2d.imageData.create.zero 2d.imageData.get.zero .
ImageData
objects must be
initialized so that their width
attribute is set to
w, the number of physical device pixels per row in the
image data, their height
attribute is set to
h, the number of rows in the image data, and their
data
attribute
is initialized to a CanvasPixelArray
object holding the
image data # 2d.imageData.create.initial . At least one pixel's worth of image data must be returned # 2d.imageData.create.tiny 2d.imageData.get.tiny .
The CanvasPixelArray
object
provides ordered, indexed access to the color components of each pixel of
the image data. The data must be represented in left-to-right order, row
by row top to bottom, starting with the top left, with each pixel's red,
green, blue, and alpha components being given in that order for each
pixel # 2d.imageData.get.order.cols 2d.imageData.get.order.rows 2d.imageData.get.order.rgb 2d.imageData.get.order.alpha . Each component of each device pixel represented in this array must
be in the range 0..255, representing the 8 bit value for that component # 2d.imageData.get.values 2d.imageData.get.values .
The components must be assigned consecutive indices starting with 0 for
the top left pixel's red component.
The CanvasPixelArray
object
thus represents h×w×4
integers. The length
attribute of a
CanvasPixelArray
object must
return this number.
The XXX5(index)
method must return the value of the
indexth component in the array.
The XXX6(index, value)
method must
set the value of the indexth component in the array to
value # 2d.imageData.object.set . JS undefined
values must be
converted to zero # 2d.imageData.object.undefined . Other values must first be converted to numbers using
JavaScript's ToNumber algorithm # 2d.imageData.object.string , and if the result is a NaN value, then
the value be must converted to zero # 2d.imageData.object.nan . If the result is less than 0, it must
be clamped to zero # 2d.imageData.object.clamp . If the result is more than 255, it must be clamped to
255 # 2d.imageData.object.clamp . If the number is not an integer, it must be rounded to the nearest
integer using the IEEE 754r convertToIntegerTiesToEven rounding
mode # 2d.imageData.object.round . [ECMA262] [IEEE754R]
The width and height (w and h) might be different from the sw and sh arguments to the above methods, e.g. if the canvas is backed by a high-resolution bitmap, or if the sw and sh arguments are negative.
The putImageData(imagedata, dx, dy)
and putImageData(imagedata, dx, dy,
dirtyX, dirtyY, dirtyWidth, dirtyHeight)
methods write data from ImageData
structures back to the canvas.
If any of the arguments to the method are infinite or NaN, the method
must raise an NOT_SUPPORTED_ERR
exception # 2d.imageData.put.nonfinite .
If the first argument to the method is null # 2d.imageData.put.null or not an ImageData
object # 2d.imageData.put.wrongtype then the putImageData()
method must raise a
TYPE_MISMATCH_ERR
exception.
When the last four arguments are omitted, they must be assumed to have
the values 0, 0, the width
member of the imagedata structure, and the height
member of
the imagedata structure, respectively # 2d.imageData.put.basic .
When invoked with arguments that do not, per the last few paragraphs,
cause an exception to be raised, the putImageData()
method must act as follows # 2d.imageData.put.basic 2d.imageData.put.created 2d.imageData.put.cross 2d.imageData.put.alpha 2d.imageData.put.modified 2d.imageData.put.dirty.zero 2d.imageData.put.dirty.rect1 2d.imageData.put.dirty.rect2 2d.imageData.put.dirty.negative 2d.imageData.put.dirty.outside :
Let dxdevice be the x-coordinate of the device pixel in the underlying pixel data of the canvas corresponding to the dx coordinate in the canvas coordinate space.
Let dydevice be the y-coordinate of the device pixel in the underlying pixel data of the canvas corresponding to the dy coordinate in the canvas coordinate space.
If dirtyWidth is negative, let dirtyX be dirtyX+dirtyWidth, and let dirtyWidth be equal to the absolute magnitude of dirtyWidth.
If dirtyHeight is negative, let dirtyY be dirtyY+dirtyHeight, and let dirtyHeight be equal to the absolute magnitude of dirtyHeight.
If dirtyX is negative, let dirtyWidth be dirtyWidth+dirtyX, and let dirtyX be zero.
If dirtyY is negative, let dirtyHeight be dirtyHeight+dirtyY, and let dirtyY be zero.
If dirtyX+dirtyWidth is greater than the width
attribute
of the imagedata argument, let dirtyWidth be the value of that width
attribute,
minus the value of dirtyX.
If dirtyY+dirtyHeight is greater than the height
attribute of the imagedata argument, let dirtyHeight be the value of that height
attribute, minus the value of dirtyY.
If, after those changes, either dirtyWidth or dirtyHeight is negative or zero, stop these steps without affecting the canvas.
Otherwise, for all integer values of x and y where dirtyX ≤ x < dirtyX+dirtyWidth and dirtyY ≤ y < dirtyY+dirtyHeight, copy the four channels of the pixel with coordinate (x, y) in the imagedata data structure to the pixel with coordinate (dxdevice+x, dydevice+y) in the underlying pixel data of the canvas.
The handling of pixel rounding when the specified coordinates do not exactly map to the device coordinate space is not defined by this specification, except that the following must result in no visible changes to the rendering # 2d.imageData.put.unchanged :
context.putImageData(context.getImageData(x, y, w, h), x, y);
...for any value of x, y, w, and h, and the following two calls:
context.createImageData(w, h); context.getImageData(0, 0, w, h);
...must return ImageData
objects
with the same dimensions, for any value of w and h # 2d.imageData.create.round . In other words, while user agents may round the
arguments of these methods so that they map to device pixel boundaries,
any rounding performed must be performed consistently for all of the createImageData()
, getImageData()
and putImageData()
operations.
The current path, transformation matrix, shadow attributes, global alpha, the
clipping region, and global composition
operator must not affect the getImageData()
and putImageData()
methods # 2d.imageData.get.unaffected 2d.imageData.put.unaffected 2d.imageData.put.clip .
The data returned by getImageData()
is at the resolution of
the canvas backing store, which is likely to not be one device pixel to
each CSS pixel if the display used is a high resolution display.
In the following example, the script generates an ImageData
object so that it can draw onto
it.
// canvas is a reference to a <canvas> element var context = canvas.getContext('2d'); // create a blank slate var data = context.createImageData(canvas.width, canvas.height); // create some plasma FillPlasma(data, 'green'); // green plasma // add a cloud to the plasma AddCloud(data, data.width/2, data.height/2); // put a cloud in the middle // paint the plasma+cloud on the canvas context.putImageData(data, 0, 0); // support methods function FillPlasma(data, color) { ... } function AddCloud(data, x, y) { ... }
Here is an example of using getImageData()
and putImageData()
to implement an edge
detection filter.
<!DOCTYPE HTML> <html> <head> <title>Edge detection demo</title> <script> var image = new Image(); function init() { image.onload = demo; image.src = "image.jpeg"; } function demo() { var canvas = document.getElementsByTagName('canvas')[0]; var context = canvas.getContext('2d'); // draw the image onto the canvas context.drawImage(image, 0, 0); // get the image data to manipulate var input = context.getImageData(0, 0, canvas.width, canvas.height); // get an empty slate to put the data into var output = context.crateImageData(canvas.width, canvas.height); // alias some variables for convenience // notice that we are using input.width and input.height here // as they might not be the same as canvas.width and canvas.height // (in particular, they might be different on high-res displays) var w = input.width, h = input.height; var inputData = input.data; var outputData = output.data; // edge detection for (var y = 1; y < h-1; y += 1) { for (var x = 1; x < w-1; x += 1) { for (var c = 0; c < 3; c += 1) { var i = (y*w + x)*4 + c; outputData[i] = 127 + -inputData[i - w*4 - 4] - inputData[i - w*4] - inputData[i - w*4 + 4] + -inputData[i - 4] + 8*inputData[i] - inputData[i + 4] + -inputData[i + w*4 - 4] - inputData[i + w*4] - inputData[i + w*4 + 4]; } outputData[(y*w + x)*4 + 3] = 255; // alpha } } // put the image data back after manipulation context.putImageData(output, 0, 0); } </script> </head> <body onload="init()"> <canvas></canvas> </body> </html>
When a shape or image is painted, user agents must follow these steps, in the order given (or act as if they do):
Render the shape or image, creating image A, as described in the previous sections. For shapes, the current fill, stroke, and line styles must be honored, and the stroke must itself also be subjected to the current transformation matrix.
Render the shadow from image A, using the current shadow styles, creating image B.
Multiply the alpha component of every pixel in B
by globalAlpha
.
Within the clipping region, composite B over the current canvas bitmap using the current composition operator.
Multiply the alpha component of every pixel in A
by globalAlpha
.
Within the clipping region, composite A over the current canvas bitmap using the current composition operator.
The canvas
APIs must perform color
correction at only two points: when rendering images with their own gamma
correction and color space information onto the canvas, to convert the
image to the color space used by the canvas (e.g. using the drawImage()
method with an HTMLImageElement
object), and when
rendering the actual canvas bitmap to the output device.
Thus, in the 2D context, colors used to draw shapes onto the
canvas will exactly match colors obtained through the getImageData()
method.
The toDataURL()
method must not include color
space information in the resource returned. Where the output format allows
it, the color of pixels in resources created by toDataURL()
must match those returned by the getImageData()
method.
In user agents that support CSS, the color space used by a canvas
element must match the color space used
for processing any colors for that element in CSS.
The gamma correction and color space information of images must be
handled in such a way that an image rendered directly using an img
element would use the same colors as one
painted on a canvas
element that is
then itself rendered. Furthermore, the rendering of images that have no
color correction information (such as those returned by the toDataURL()
method) must be rendered with no color correction.
Thus, in the 2D context, calling the drawImage()
method to render the output of the toDataURL()
method to the canvas, given the
appropriate dimensions, has no visible effect.
canvas
elementsInformation leakage can occur if scripts from one origin can access information (e.g. read pixels) from images from another origin (one that isn't the same).
To mitigate this, canvas
elements are
defined to have a flag indicating whether they are origin-clean.
All canvas
elements must start with
their origin-clean set to true # security.pattern.create security.pattern.cross security.pattern.canvas.timing . The flag must be set to false if
any of the following actions occur:
The element's 2D context's drawImage()
method is called with an
HTMLImageElement
whose origin is not the same as that of the Document
object that owns
the canvas
element # security.drawImage.image .
The element's 2D context's drawImage()
method is called with an
HTMLCanvasElement
whose
origin-clean flag is false # security.drawImage.canvas .
The element's 2D context's fillStyle
attribute is set to a CanvasPattern
object that was created
from an HTMLImageElement
whose origin was not the same as that of the Document
object
that owns the canvas
element when the
pattern was created # security.pattern.image.fillStyle .
The element's 2D context's fillStyle
attribute is set to a CanvasPattern
object that was created
from an HTMLCanvasElement
whose origin-clean flag was false when the pattern was created # security.pattern.canvas.timing security.pattern.canvas.fillStyle .
The element's 2D context's strokeStyle
attribute is set to a
CanvasPattern
object that was
created from an HTMLImageElement
whose origin was not the same as that of the Document
object
that owns the canvas
element when the
pattern was created # security.pattern.image.strokeStyle .
The element's 2D context's strokeStyle
attribute is set to a
CanvasPattern
object that was
created from an HTMLCanvasElement
whose
origin-clean flag was false when the pattern was created # security.pattern.canvas.strokeStyle .
Whenever the toDataURL()
method of a canvas
element whose origin-clean flag is
set to false is called, the method must raise a security exception # security.drawImage.image .
Whenever the getImageData()
method of the 2D context of
a canvas
element whose
origin-clean flag is set to false is called with otherwise correct
arguments, the method must raise a security
exception # security.drawImage.image .
Even resetting the canvas state by changing its width
or height
attributes
doesn't reset the origin-clean flag.